Does anyone know how to reset the maintenance count on the Kyocera fs-9500. They have discontinued parts on this printer and I just want to reset and not put in a 500k kit on such an old printer. But I do want to get rid of the maintenance light. There should be a prescribe command on this.
-
-
Re: fs 9500 mk reset
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com -
Re: fs 9500 mk reset
Black developing unit: Send the following PreScribe command: !R! KCFG "LFRE","DEVK",0;EXIT; Note: any value can be set, not just 0.
Drum Unit: Send the following PreScribe command: !R! KCFG "LFRE","DRUM",0;EXIT; Note: any value can be set, not just 0.
Fuser Unit: Send the following PreScribe command: !R! KCFG "LFRE","FUSR",0;EXIT; Note: any value can be set, not just 0.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: fs 9500 mk reset
please detail how to get in an run the prescribe commands mentionedComment
Comment