5500i fuser seperator claws/fingers

[dickierock]

Does anyone have a part no. for the fuser seperator claws for 5500i?
They're not listed in the Kyocera or Olivetti parts manual.Seems ridiculous to have to buy a whole fuser / maintenance kit for the sake of
a broken sep claw.
Thanks.

[taskalfaman]

Re: 5500i fuser seperator claws/fingers

hi,

you have to buy a complete fixing unit.
llu ( long life unit) 3 years warranty.

Br

[Eric1968]

Re: 5500i fuser seperator claws/fingers

If it's just one broken separation claw, maybe you can remove it and put the fuser back in the machine. Most of the times they work fine with only one missing.

[Dickie]

Re: 5500i fuser seperator claws/fingers

What is the olivetti equivalent model number?

[dickierock]

[Tebow83]

Re: 5500i fuser seperator claws/fingers

you can use the claws off the old km2050 fuser.
The new ones are very badly made.

[Venom]

Re: 5500i fuser seperator claws/fingers

you can use the claws off the old km2050 fuser.
The new ones are very badly made.

agree...they seem to be chipping off, I just replaced a fuser for folding front corner....went through thinking it was the holes in the bridge unit or the gate in the attachment kit but the perfectly good looking fuser caused it