TaskAlfa500CI

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kyocera.team
    Trusted Tech
    • Aug 2010
    • 126
    #1

    TaskAlfa500CI

    I am facing problem with taskAlfa 500ci
    the problem is machine keep running over and over until the copy getting very light once i pull out the developers units and shake it
    then insert it back the first copy is very good and very clear but machine still running over and over ?
    i changed DLP's units -swap DLP's units with other machine ,but the problem still there ?
    any idea ?
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22973
      #2
      Re: TaskAlfa500CI

      Does your machine have the new style developing motor? There's a bulletin about wholesale changes in motors on this series. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • kyocera.team
          Trusted Tech
          • Aug 2010
          • 126
          #3
          Re: TaskAlfa500CI

          developing unit has been changed by new one but still the same result ? can you please attach the bulletin ..
          thanks

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22973
              #4
              Re: TaskAlfa500CI

              Originally posted by blackcat4866
              Does your machine have the new style developing motor? There's a bulletin about wholesale changes in motors on this series. =^..^=
              ... and the developing motor? =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • kyocera.team
                  Trusted Tech
                  • Aug 2010
                  • 126
                  #5
                  Re: TaskAlfa500CI

                  thanks for your reply
                  i did also ....
                  i am thinking also about the front main and sub PWB ?

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22973
                      #6
                      Re: TaskAlfa500CI

                      Those items are next in my list of possibilities. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • kyocera.team
                          Trusted Tech
                          • Aug 2010
                          • 126
                          #7
                          Re: TaskAlfa500CI

                          sub and main PWB has been changed but same problem ,also i change the engine PWB still the same ,H.D.D also ??? and for sure firmware V13 ... any other option ?
                          thanks

                            Comment

                            • blackcat4866
                              Master Of The Obvious

                              Site Contributor
                              10,000+ Posts
                              • Jul 2007
                              • 22973
                              #8
                              Re: TaskAlfa500CI

                              Post some samples. =^..^=
                              If you'd like a serious answer to your request:
                              1) demonstrate that you've read the manual
                              2) demonstrate that you made some attempt to fix it.
                              3) if you're going to ask about jams include the jam code.
                              4) if you're going to ask about an error code include the error code.
                              5) You are the person onsite. Only you can make observations.

                              blackcat: Master Of The Obvious =^..^=

                                Comment

                                • NeoMatrix
                                  Senior Tech.

                                  2,500+ Posts
                                  • Nov 2010
                                  • 3514
                                  #9
                                  Re: TaskAlfa500CI

                                  Are the TA500Ci the same as the TA552ci ?

                                  We don't have a TA500ci in the field...

                                  RE : Developer Main motor loading.

                                  The TA552ci displays a C2102 code on the display if any of the developer units lock up. Ie. Main motor jam.
                                  This lockup can happen from brand new, as the dev units are transported in their boxes on their very ends and the developer inside
                                  the unit packs down hard toward one end of the tank. If you can't rotate the mag roller in dev unit by hand you should shake
                                  sh!t out of the dev unit and rotate it until you see an even coating of developer on the mag roller, NOT the 2nd toner roller.

                                  Check the toner roller dis-engage bar at the back of the dev unit is over top of both of the tabs that control the toner roller dis-engage.

                                  I assume you have done an AC U127 as per the norm ?

                                  Try the normal user gray scale colour calibration as well. System |Maintenance| Grayscale |
                                  Grey scale adjustment give a more indepth adjustment.

                                  Of course this will only work if the TA500ci and TA552ci machines are similar. At best it may jog a light-bulb.
                                  Inauguration to the "AI cancel-culture" fraternity 1997...
                                  •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

                                    Comment

                                    • NeoMatrix
                                      Senior Tech.

                                      2,500+ Posts
                                      • Nov 2010
                                      • 3514
                                      #10
                                      Re: TaskAlfa500CI

                                      "I assume you have done AC U127 as per the norm ?"
                                      Solly olly that should have been U464 for the Kyo...
                                      Inauguration to the "AI cancel-culture" fraternity 1997...
                                      •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

                                        Comment

                                        • kyocera.team
                                          Trusted Tech
                                          • Aug 2010
                                          • 126
                                          #11
                                          Re: TaskAlfa500CI

                                          ufff ..i am fed up still same problem ..???

                                            Comment

                                            • Venom
                                              Technical/IT Support

                                              500+ Posts
                                              • Nov 2009
                                              • 765
                                              #12
                                              Re: TaskAlfa500CI

                                              Could be toner add motors. Since it measures toner at the toner cartridge it won't give an add toner message, if toner motor doesn't turn, the developer unit will starve and will start pulling developer, hense...shaking the developer unit temporarily places toner on the mag roll and gives false impression that it is fixed. Replace toner motors and developer units if I am correct.
                                              IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

                                                Comment

                                                • banginbishop
                                                  grumpy old git

                                                  500+ Posts
                                                  • Oct 2007
                                                  • 894
                                                  #13
                                                  Re: TaskAlfa500CI

                                                  reported this a few months ago in my bitchin thread. kyocera TA552ci - told unofficially problems with copy quality going faint but japan cant fix.
                                                  Incontinentia Buttocks

                                                    Comment

                                                    Previous template Next
                                                    Working...