If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
the filters are all good...I pulled all the drums and devs out yesterday and they looked fine...and when it streaks it does all 4 colors one right after the other over 2-3 pages....boss just said put MK A & B in it...it's nearing that time anyways...
"In a cruel and evil world, being cynical can allow you to get some entertainment out of it."
I suppose that you would notice really loud gear noise, like the MP drive assembly skipping against the gear on the transfer belt cleaning unit? Or the transfer auger unit packed solid with toner? That's all I can really think of. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
yeah I checked the waste toner auger...it wasn't packed up...even sat with my head up against the machine to see if that waste toner motor might be goin out. I can't find anything physically wrong with the machine. Like I said I think it's just their crappy power as we have all kinds of issues with this school district. But we'll do new drums and devs and see how it goes.
"In a cruel and evil world, being cynical can allow you to get some entertainment out of it."
Also there is newer style drum drive flange that stops the drum drive from popping out, does weird lines, one color gets shifted and may appear to be blur in some cases.
When you have drums out, press on the flanges and see if they are sticky
Comment