FS 1128 MFP C2000

[Dr.silver]

I am dying here. I am have problem with a 1128mfp it Bog downs you can hear it bog. and it get worse and worse. I cleaned all the Clutches, Cleaned the fuser and replaced the Motor. I need some help. I am not only having issues with this machine. I also have problem with the Printer models anyone know what I am over looking??

[lees]

Re: FS 1128 MFP C2000

Try looking at the drum. See if it is hard to turn or if the waste toner is full or hard in the unit. It could be causing the main motor to bog down. I haven't seen this problem on this model, but on some of the others, the drum will cause the motor to bog down causing the error code. Hope this helps. Let us know what you find.

[Venom]

Re: FS 1128 MFP C2000

try to empty the waste toner out of the drum unit, have seen a few fill up and cause issues from noise to smudges

[Dr.silver]

Re: FS 1128 MFP C2000

Drum unit is moving nicely and I clean waste toner as well. Still Dragging and bogging up.

[Kidaver]

Re: FS 1128 MFP C2000

Are you using OEM toner? We've had a few machines that ended up with Katun toner in them....I'm sure I don't have to elaborate what a horrible idea that was....

[Tonerkiller]

Re: FS 1128 MFP C2000

What was the solution? We have one with a c2000 code

[JustManuals]

Re: FS 1128 MFP C2000

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:

http://www.justmanuals.com

Paul@justmanuals.com

[zeeeba]

Re: FS 1128 MFP C2000

C2000.JPG
This picture shows what a service manual says about C2000 fault code.

[Tonerkiller]

Re: FS 1128 MFP C2000

Thanks, I know what the code means, just not sure where the drag is comming from