Getting weird marks on prints as shown in attached photos. Only 2000 prints on the machine. Checked all parts, drums , charges etc all seem fine. Any Ideas appreciated.
-
-
Re: Kyocera FS-C5150DN - weird marks on prints.
ok im taking it thats only 2 copies of the same sheet? is the image moving on each copy i presume so as its a printer and have you measured the distance between the rotating image to work out if its the drum transfere belt fuser. -
Re: Kyocera FS-C5150DN - weird marks on prints.
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Comment
-
Re: Kyocera FS-C5150DN - weird marks on prints.
Easy! This symptom hasn't change even back to the analog copiers. It's primary charge arcing. The color of the ovals matches color of the primary charge. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Kyocera FS-C5150DN - weird marks on prints.
X2 the drum arcing pattern, Replace the drum unit complete on this printersigpicComment
Comment