How to disabale the finisher connected to Kyocera KM-C4035 color copier.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mikey
    Technician

    50+ Posts
    • Sep 2009
    • 54
    #1

    How to disabale the finisher connected to Kyocera KM-C4035 color copier.

    I am working on Kyocera KM-C4035 color copier. I found defective sensor in the finisher. I want my customer to use the copier temporarily without the finisher function. How will I do that? Please help. Thanks.
    Tags: None
    • ss12
      Trusted Tech

      250+ Posts
      • Jul 2008
      • 289
      #2
      Unplug the finisher

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22999
          #3
          Re: How to disabale the finisher connected to Kyocera KM-C4035 color copier.

          Originally posted by ss12
          Unplug the finisher
          Amend that: Turn Off power > Unplug finisher > Turn On power.
          You could blow the main PWB if you unplug or plug in an accessory live. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • ss12
              Trusted Tech

              250+ Posts
              • Jul 2008
              • 289
              #4
              Originally posted by blackcat4866
              Amend that: Turn Off power > Unplug finisher > Turn On power.
              You could blow the main PWB if you unplug or plug in an accessory live. =^..^=
              Sorry forgot that,was assuming he/she was a tech and would do that as a matter of course.

                Comment

                • Mikey
                  Technician

                  50+ Posts
                  • Sep 2009
                  • 54
                  #5
                  Re: How to disabale the finisher connected to Kyocera KM-C4035 color copier.

                  Originally posted by blackcat4866
                  Amend that: Turn Off power > Unplug finisher > Turn On power.
                  You could blow the main PWB if you unplug or plug in an accessory live. =^..^=
                  Thanks Blackcat I'll do that.

                    Comment

                    • Mikey
                      Technician

                      50+ Posts
                      • Sep 2009
                      • 54
                      #6
                      Re: How to disabale the finisher connected to Kyocera KM-C4035 color copier.

                      Originally posted by ss12
                      Sorry forgot that,was assuming he/she was a tech and would do that as a matter of course.
                      Thanks for your reply SS12. I am overseeing more than 250 copiers different brands and models in 9 government buildings filled with offices. Prohibition on using computers and tablets for technical references is not an excuse for being clumsy. This site helps a lot knowing you guys are there with a helping hand. However, we are all humans and not perfect in all things that we do. Cheers.

                        Comment

                        • ss12
                          Trusted Tech

                          250+ Posts
                          • Jul 2008
                          • 289
                          #7
                          No worries,have a good day

                            Comment

                            Previous template Next
                            Working...