TASKalfa 5500i System Error F000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • EDSNOW
    Trusted Tech

    100+ Posts
    • Feb 2009
    • 180
    #1

    [Error Code] TASKalfa 5500i System Error F000

    I am looking for a little input on this issue as my customer is 250 miles away (why does this always have to be). First suggestion was U906 reset, easiest to do.
    Anyway I am trying the firmware update as a possible resolution followed by U024 hard disk full format,
    followed by reseating the memory module and the hard disk cables.

    I think that is about all I can suggest to the customer to try themselves.

    I expect it will either be a disk drive or a main board replacement.

    Any opinions greatly appreciated.
    Thanks
    Tags: 5500i
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22999
      #2
      Re: TASKalfa 5500i System Error F000

      You're going to suggest that the enduser perform these functions? I know plenty of decent techs that have "brick'ed" an MFP, when they had a pretty good idea what needed to be done. You're just asking for trouble.

      No way would I have any customer load firmware or do a hard disk reformat. It's just too easy to further screw up the machine. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • EDSNOW
          Trusted Tech

          100+ Posts
          • Feb 2009
          • 180
          #3
          Re: TASKalfa 5500i System Error F000

          Sometimes Blackcat you got to have a little trust.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22999
              #4
              Re: TASKalfa 5500i System Error F000

              Originally posted by EDSNOW
              Sometimes Blackcat you got to have a little trust.
              That's how I've gotten where I am at. By having a very healthy skepticism of the "facts".

              What sort of service contracts do you offer? 1/2 price if you perform the labor yourself?
              =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • JustManuals
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2006
                  • 9838
                  #5
                  Re: TASKalfa 5500i System Error F000

                  This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


                  Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


                  Paul@justmanuals.com

                    Comment

                    • Venom
                      Technical/IT Support

                      500+ Posts
                      • Nov 2009
                      • 765
                      #6
                      Re: TASKalfa 5500i System Error F000

                      if formatting you may need to leave front door open to enter u24, address book will be gone
                      IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

                        Comment

                        • EDSNOW
                          Trusted Tech

                          100+ Posts
                          • Feb 2009
                          • 180
                          #7
                          Re: TASKalfa 5500i System Error F000

                          Problem resolved.
                          Thanks for a positive input Venom.
                          If anyone requires more details feel free to email me.

                            Comment

                            Previous template Next
                            Working...