KM4050i to KM4050 conversion?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dalamar
    Trusted Tech

    100+ Posts
    • Oct 2006
    • 117
    #1

    KM4050i to KM4050 conversion?

    I want to be able to put a KM4050 toner into a KM4050i, what do I need to replace on the machine? And if you have the part numbers that would be awesome.

    Don't get me wrong it's fun to pull the plugs and dump the toner between bottles, but i'd rather not.

    Thanks
    Notatechie - "I am trying, but I don't know how to go into Service Mode. If I just go in and press *then 2, than 8, then * it does not do anything."
    SCREWTAPE - "Try harder.."


    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22999
      #2
      Re: KM4050i to KM4050 conversion?

      I haven't done it myself, but here are the differences that I'm aware of:

      The toner drive coupler is different. You can order it separately. You'll have to change the destination U265. To use Kyocera Mita toner set to 02, Copystar set to 66. The machine hostname will change. you can use the new one or change it. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Dalamar
          Trusted Tech

          100+ Posts
          • Oct 2006
          • 117
          #3
          Re: KM4050i to KM4050 conversion?

          Your right the only part that is different is the toner drive coupler PN:302GR31010

          It's the only thing that needs to be replaced...rotten Ikon trying to make it proprietary toner.

          Figured I'd include the part number encase anyone else needs it.
          Notatechie - "I am trying, but I don't know how to go into Service Mode. If I just go in and press *then 2, than 8, then * it does not do anything."
          SCREWTAPE - "Try harder.."


            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22999
              #4
              Re: KM4050i to KM4050 conversion?

              I'm glad it was that easy. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...