KM 2530 series

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tcypy1961
    Senior Tech

    500+ Posts
    • Feb 2009
    • 773
    #1

    KM 2530 series

    What is the cause for copies to look under tone after installing new cartridge of toner; doesn't seem to make a difference whether toner in genuine or generic??? Was called out to install toner sometimes toner has to be installed before a test copy can be made other times not.
    Thanks!!!
    Tags: None
    • Tonerkiller
      Senior Tech

      500+ Posts
      • Oct 2012
      • 668
      #2
      Re: KM 2530 series

      Maybe the machine needs a new charge wire or grid. I put a new charge wire on these every 100k

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22999
          #3
          Re: KM 2530 series

          There's not much to go wrong with these. If the prints are OK, maybe it's dirty optics. A dirty primary can do it, and aftermarket toner. The aftermarket toner is the most common culprit. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • MR Bill
              Senior Tech

              500+ Posts
              • Jan 2010
              • 532
              #4
              Re: KM 2530 series

              Generic toner for sure. Check other items also.

                Comment

                • Venom
                  Technical/IT Support

                  500+ Posts
                  • Nov 2009
                  • 765
                  #5
                  Re: KM 2530 series

                  Common reasons for light copies...1)filters on right side of copier get clogged and toner hardens on the mag roll.
                  2)dirty laser slit glass 3)dirty optics using AE mode 4)transfer roller clip broke or spring missing5)generic toner
                  IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

                    Comment

                    • marley
                      Technician
                      • Sep 2010
                      • 58
                      #6
                      Re: KM 2530 series

                      Originally posted by tcypy1961
                      What is the cause for copies to look under tone after installing new cartridge of toner; doesn't seem to make a difference whether toner in genuine or generic??? Was called out to install toner sometimes toner has to be installed before a test copy can be made other times not.
                      Thanks!!!


                      non-genuine toner for sure ..

                        Comment

                        Previous template Next
                        Working...