Hi everyone, wondered if anyone can assist or at least confirm what I am thinking. We have a Utax CDC1930, which is kyocera 3050ci, which is putting no cyan image on page, nothing at all, compleatly blank, all other colours perfect, the machine is relatively new, about 100k on count, I have swapped the dev and drum, no change, checked transfer belt, no obvious problems, although it is hard to tell, i have done a copy with the main charge for cyan out, no change, ran a copy with the magenta charge out, and get obvious magenta issue. Im leaning towards a charge related problem, HV board issue? we have one in the office we can try bits from, was just wondering if anyone has had a similar issue to try speed things up a little.
Thanks for reading, any thought/ comments appreciated.
Thanks for reading, any thought/ comments appreciated.
Comment