jam 47

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jibacoa
    Junior Member
    • Nov 2012
    • 8

    #1

    [Jamming] jam 47

    i have more km-3060 with jam 47.03.88.01.00
    i have change more parts but the problem is often present
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22929

    #2
    Re: jam 47

    Which parts have you changed? Have you looked up the J47 in the service manual? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • jibacoa
      Junior Member
      • Nov 2012
      • 8

      #3
      Re: jam 47

      tomorrow I try to change the registration clutch

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22929

        #4
        Re: jam 47

        ... or you could find out what a J47 jam is. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838

          #5
          Re: jam 47

          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


          Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

          Comment

          Working...