Is there a way to print 3 pages from a single document and staple it? I can copy a single document with a quanity of 3 and staple it, but can't do the same with a one page document printed with a quanity of 3.
-
-
Re: Stapling Issue with a CS 4550ci
Not that I am aware of -
Re: Stapling Issue with a CS 4550ci
The easiest (and probably only) way to do it would be to create a 3 page document having the same image on each page...But I'm trying, Ringo. I'm trying real hard... to be the Shepherd.
Comment
-
Re: Stapling Issue with a CS 4550ci
good thinking. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Place original on glass and use continuous scan.Comment
-
Set collate and offset to off and select # of copies and staple. Worked here on 5550ci.Comment
-
Re: Stapling Issue with a CS 4550ci
Yes, I can do it when copying but not when printing. I can't change the settings in the driver to do the same as I do in the copy mode. Maybe the can be the updated version of the KX driver next month.Comment
-
Re: Stapling Issue with a CS 4550ci
Try the sort funtion "group"Comment
-
Re: Stapling Issue with a CS 4550ci
maybe using prescribe? im not sure though, I've never used it.Comment
Comment