KM-3232 Scanner problem

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22930
    #16
    Originally posted by RRodgers
    Sorry to keep poking (but I'll be doing this tomorrow) Is there only one usb port on the copier? Is said port under a cover that I need to remove?
    There are a couple. I use the convenient one on the right side of the op panel. It's not hidden.

    When you do your export/import enter the simulation, then plug in the USB stick. It will take ~5 seconds for the machine to recognize the stick and darken up the function buttons on the panel. Then select the items you want to import or export, and select either import or export, then Start. When it reaches 100% on all of the selected items you're done.

    This sim was added on one of the earliest versions of the firmware. If you cannot find a sim U917, upgrade the firmware. The most current firmware came out just yesterday.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

      Comment

      • RRodgers
        Service Manager

        1,000+ Posts
        • Jun 2009
        • 1947
        #17
        Ok thanks bud. I don't have access to the firmware. I hope the mod is in the current version that the machine does have.
        Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

          Comment

          • blackcat4866
            Master Of The Obvious

            Site Contributor
            10,000+ Posts
            • Jul 2007
            • 22930
            #18
            Hey, I was thinking of the specifics of the TASKalfa machines.

            The Voyager backs up to a CF card, plugged directly into the print card. You'll want to select SRAM > CF: FAX DIAL INFO

            The Voyager was the first to get this functionality, and will backup fax speed dials only, not scan destinations. I recommend that you get a manual.
            If you'd like a serious answer to your request:
            1) demonstrate that you've read the manual
            2) demonstrate that you made some attempt to fix it.
            3) if you're going to ask about jams include the jam code.
            4) if you're going to ask about an error code include the error code.
            5) You are the person onsite. Only you can make observations.

            blackcat: Master Of The Obvious =^..^=

              Comment

              Previous 1 2 template Next
              Working...