KM3050

[CrapAimer]

Hi

Ricoh Trained engineer, looking to replace the fuser roller in a KM3050 does anyone have the replacement procedure they could send me

Many Thanks
George

[JustManuals]

Re: KM3050

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:

http://www.justmanuals.com

Paul@justmanuals.com

[blackcat4866]

Re: KM3050

If you can't figure this one out you should think of another line of work. This is the simplest fuser I've ever seen. =^..^=

[Jules Winfield]

Re: KM3050

If you can't figure this one out you should think of another line of work. This is the simplest fuser I've ever seen. =^..^=

In the OP's defense, he's a Ricoh tech. He's probably used to their backwards engineering logic.

[CrapAimer]

Re: KM3050

My My sarcasim

I think you 2 are in the wrong line of work Should be on the stage couple of comedians I think NOT

think I can strip down a fuser it was how to get it out machine numpty

[ss12]

It comes out the front of the machine.remove the panel to the left of the ops panel ,couple of connectors then 1 screw that should be it

[CrapAimer]

Re: KM3050

Thanks Mate

George

[blackcat4866]

Re: KM3050

Ask the question you want answered. We're all born smart-asses here. =^..^=