kyocera Taskalfa 520i Copyng and Scanning Lining issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kibbs
    Technician

    50+ Posts
    • Apr 2013
    • 94
    #1

    kyocera Taskalfa 520i Copyng and Scanning Lining issue

    Dear Friends,

    I was Facing on Serious problem in customer. Printing is fine.. While copying from Glass in portrait and landscape lining is their.. From the DP Portrait lining is their but in the Landscape( DP) copies okay.
    Scanning     also the same issue.. Glass in portrait and landscape lining is their..From the DP Portrait lining is their but in the Landscape( DP) copies okay.

    i attached the sample scan copy 1 page and copies from glass and from dp in one file for your view..

    Please give some solution to fix the issue

    Note: Small arrow which i mention through pen lining is their...

    Regards

    kibbs
    Attached Files
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22930
      #2
      Re: kyocera Taskalfa 520i Copyng and Scanning Lining issue

      So kibbs, what have you done so far?

      How does the document feeder close? Is the height even? It could be just mis-adjustment or worn out hinges. Is the platen in good condition?
      Here's the idea. The paper isn't held down firmly to the glass. Maybe because the platen is out of position, ripped, or totally missing. Maybe because another tech thought they'd fix a skew problem, and totally botched the height adjustment. Maybe because the hinges are worn.

      Me? I'd get out my manual, and go through the document feeder adjustments section. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: kyocera Taskalfa 520i Copyng and Scanning Lining issue

          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


          http://www.justmanuals.com



          Paul@justmanuals.com

            Comment

            • kibbs
              Technician

              50+ Posts
              • Apr 2013
              • 94
              #4
              Re: kyocera Taskalfa 520i Copyng and Scanning Lining issue

              Originally posted by blackcat4866
              So kibbs, what have you done so far?

              How does the document feeder close? Is the height even? It could be just mis-adjustment or worn out hinges. Is the platen in good condition?
              Here's the idea. The paper isn't held down firmly to the glass. Maybe because the platen is out of position, ripped, or totally missing. Maybe because another tech thought they'd fix a skew problem, and totally botched the height adjustment. Maybe because the hinges are worn.

              Me? I'd get out my manual, and go through the document feeder adjustments section. =^..^=
              Dear Blackcat,
              1. Platten glass are even...
              2. feeder also closing correctly..!!
              3. In feeder, landscape copy is okay. portrait only problem..
              4. Platen glass is very neat and clean.. inside also lamp and glasses i cleaned with the alcohol..

              i am going to try to disassemble and assemble it again with the proper fixing. Give me your valuable opinion

              thanks and regards

              raja

                Comment

                Previous template Next
                Working...