This machine had a squeal in the drive assembly so I took some of the drive motors out to lube it and try and get rid of the squeal and now it's giving me this code. I triple checked all the connections and they all look good. This sucks. Any advice is appreciated. Thanks in advance!
TA 300ci C2950
Collapse
X
-
Re: TA 300ci C2950
C2950 is a communication error to the motor control PWB. Once you've re-seated the connectors, the only thing to do is replace the motor control PWB. And yes, I've seen a bad one. Color registration was way way out. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: TA 300ci C2950
That sucked. I found a couple of wires I had pinched under a metal bracket. Thanks for the input though.Just because you're not paranoid doesn't mean they're not out to get you.
O.o
WARNING: My profile page can cause blindness in small children and old copier techs. View at your own risk.
Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment