FS-C 8025MFP

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mike L
    Technician
    • Jun 2012
    • 11
    #1

    [Misc] FS-C 8025MFP

    Registration Y is not god
    2-3 dashes Y3 4 and 5 are adjacent and can not be adjusted
    we have made FW Update made ​​multiple drums against each exchanged transfer belt transfer roller + laserunit changed all to no avail
    See pdf Y3 you must zoom 300% to see it
    servicebulletin B311 executed
    All attempts to adjust the image were without useful result.
    my english is not god i come from germany
    Thank for your answer
    Attached Files
    Tags: None
    • Eric1968
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2458
      #2
      Re: FS-C 8025MFP

      Looks like a faulty laser unit.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22973
          #3
          Re: FS-C 8025MFP

          Is the firmware up to date? Have you attempted to adjust yellow color registration at least 4 consecutive times? If yes, I agree with Eric, laser. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • Mike L
              Technician
              • Jun 2012
              • 11
              #4
              Re: FS-C 8025MFP

              Thanks for the answer
              The Y Laserunit is new
              we have the reg for Y 5 times adjusted U468 Checking the color registration data
              we make Initialize
              without success
              Kyo say the enginboard and the PWB LSU CONNECT order , we do it
              next week we Change the enginboard and the PWB LSU CONNECT


                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22973
                  #5
                  Re: FS-C 8025MFP

                  Let us know how it goes. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • Mike L
                      Technician
                      • Jun 2012
                      • 11
                      #6
                      Re: FS-C 8025MFP

                      we have change the engine board and the laser conect board and the print was not ok
                      the Maschine will change by kyocera in next week

                        Comment

                        Previous template Next
                        Working...