Kyocera T/A 400ci random black lines

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • brecht2
    Technician

    50+ Posts
    • Feb 2012
    • 71
    #1

    Kyocera T/A 400ci random black lines

    Hello folks,

    Today i was facing a strange problem.
    Client was complaining about quality issue.
    Little (short) horizontal black lines appeared by printing randomly all over the page.
    I've this also by printing in colour.

    I changed the DV black, drum in black, transfer belt, 2nd transfer roller, fusing. Vacuumed inside the machine, cleaned contacts from Developer, HVU transfer belt contacts etc... Laser glass has been cleaned. (but i didn't unmount the laser unit to clean it...)
    F/W= version 13
    Sim 464 ac callibration has been done. Sim 412...

    It could be the cleaning motor from black?
    If it should be the laser i guess i'll have white lines in text?

    Any comment should be appreciated...

    Thanks on advance
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22999
      #2
      Re: Kyocera T/A 400ci random black lines

      Do these lines appear on U089 internal prints? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • brecht2
          Technician

          50+ Posts
          • Feb 2012
          • 71
          #3
          Re: Kyocera T/A 400ci random black lines

          Hi Blackcat,

          Yes, on the U89 testpages to in all colors...
          It could be a bad cleaning motor from the black drum unit maybe?
          Used gears in the imaging drive unit?
          Since then i didn't hear this client back.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22999
              #4
              Re: Kyocera T/A 400ci random black lines

              Do you have a sample? =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • brecht2
                  Technician

                  50+ Posts
                  • Feb 2012
                  • 71
                  #5
                  Re: Kyocera T/A 400ci random black lines

                  Hello blackcat,

                  The client didn't called back since almost 3 weeks...
                  I suppose they can life with it or the black lines diseapeared...
                  When they call back for this issue i'll scan an example.

                  Anyway thanks for the support!

                  Grts

                    Comment

                    Previous template Next
                    Working...