Taskalfa 2551ci dropping toner

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copycoan
    Technician
    • Sep 2012
    • 31

    #16
    Re: Taskalfa 2551ci dropping toner

    Originally posted by BHRLC
    What's the bulletin number, please?
    Update with pic (Horrible things shown!! Including "Y" drum and door "flap") -
    i got the same problem in 2550ci , the waste was not going out of drum units and the clutch for put out the waste inside of the drum was broken. also there is a bulletin about a clutch that moves the parts pipe transfer cleaning coming off so the same can occurs to tansfer belt. check out if waste toner container is empty or not filled as expected so machine is not cleaning fine, i remember i changed inner section because all drums just broke the cleaning helicoidal clucth when full of toner inside the units.

    ps. sorry for my english.
    Last edited by copycoan; 02-23-2015, 09:49 AM. Reason: pic detail

    Comment

    • stevegibsons
      Technician
      • Jun 2012
      • 12

      #17
      Re: Taskalfa 2551ci dropping toner

      Hello does anyone have the kyocera bulletins for this machine so I can compare thanks

      Comment

      • jamde
        Junior Member
        • Oct 2014
        • 2

        #18
        Re: Taskalfa 2551ci dropping toner

        Try a new transfer belt. I have Repl several for toner smudges.

        Comment

        • darry1322
          Senior Tech

          Site Contributor
          500+ Posts
          • Oct 2010
          • 817

          #19
          Re: Taskalfa 2551ci dropping toner

          Possibly related, but that drum pic looks a lot like the black drum units on the 500ci series when the drum cleaning motor failed.

          Comment

          • jmaister
            certified scrub

            Site Contributor
            500+ Posts
            • Aug 2010
            • 755

            #20
            Re: Taskalfa 2551ci dropping toner

            awww shite.

            check your waste toner bottle. IF THERE is NONE inside or strangely minimal, the waste toner drive shaft is detached. take the transfer belt out, look inside (far end)and see if you spot a long stick leaning on something.

            do it quickly, it will chew out all them gear teeth like ALL OF THEM.


            But if the waste toner level is healthy(plenty) the cleaning blade is shot, and they are awful cant even take a beating.
            Idling colour developers are not healthy developers.

            Comment

            • tec966
              Technician
              • Mar 2009
              • 41

              #21
              Re: Taskalfa 2551ci dropping toner

              Originally posted by ss12
              If your getting colour streaks down the page there is a bulletin for a change of gear on the charge roller to stop vibration
              Sorry, where is the bulletin ?
              Thanks

              Comment

              • tmaged
                Owner/Service Manager

                Site Contributor
                1,000+ Posts
                • Oct 2008
                • 1869

                #22
                Re: Taskalfa 2551ci dropping toner

                New firmware out to resolve this issue.
                Hope that helps !
                -Tony
                www.dtios.com
                Become a fan on Facebook

                Comment

                Working...