FS-1135 Black Pages

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • paulyshobby
    Junior Member
    • May 2014
    • 7
    #1

    [CQ] FS-1135 Black Pages

    Hey guys,

    Have an FS-1135 I'm working on. Whether I copy or print, he pages are coming out completely black. Any ideas what could be causing this?

    Thanks in advance
    Paul
    Tags: None
    • paulyshobby
      Junior Member
      • May 2014
      • 7
      #2
      Re: FS-1135 Black Pages

      I swapped out the toner and developer cartridges and charge unit with another unit and still have the same issue. I'm leaning towards maybe a main board?
      Last edited by paulyshobby; 06-17-2014, 03:24 PM.

        Comment

        • Eric1968
          Service Manager

          1,000+ Posts
          • Jan 2009
          • 2458
          #3
          Re: FS-1135 Black Pages

          If the pages are all black you may have a problem with drum charging. Could be a bad drum or a bad HV-board.

            Comment

            • Venom
              Technical/IT Support

              500+ Posts
              • Nov 2009
              • 765
              #4
              Re: FS-1135 Black Pages

              i would look at the dev bias contact on machine...may be bent
              IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

                Comment

                • slusser08
                  #5
                  Re: FS-1135 Black Pages

                  Originally posted by paulyshobby
                  Hey guys,

                  Have an FS-1135 I'm working on. Whether I copy or print, he pages are coming out completely black. Any ideas what could be causing this?

                  Thanks in advance
                  Paul
                  Did you ever figure out what this was I am having the same issues but have already swapped toner, dv, drum, HV Board, main board, and the DV bias contact on machine appears fine.

                    Comment

                    Previous template Next
                    Working...