I need to reset all settings on this machine to factory default. How I can do it?
-
-
Sim 002."Some days you get the bear, some days the bear gets you."
Cdr. William Riker -
Thanks
I'm new to Kyocera still.
"Some days you get the bear, some days the bear gets you."
Cdr. William RikerComment
-
Not a problem.... We are all still learning. The day you know it all and are content, is the day you die....My mission here on Earth is to help all you Dum-Dums!Comment
-
HowTo: Sim 002 reset
Folks, can someone give to me turn by turn directions, How can I do this mysterious Sim 002 resetComment
-
U002 will only move the scanner rail to the far left of the machine to lock it in for transport. It doesn't change any settings.
You can clear everything using a U020 reset, however doing so will clear some settings such as machine destination, DF registration, paper timing values ect, so you should print out a maintenance list (U000) first so you've got a copy of these values.Comment
-
You should be absolutely sure you want to do a lobotomy on your 3035.
Even with the maintenance report it can be very difficult to restore all the settings. I have only run 020 a few times and usually regret it. And it doesn't fix anything.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
reset or do not reset?
ok
here is my problems: I got 3035 week or so ago. 3035 have passwords everywhere and nobody know it. It is out of waranty and service.
My goal is Removing all passwords and adjust settings to comply with our network and so on.Comment
-
Thank you ALL!!!
I will contact Kyocera to find tech support near of my location.
Thx .Comment
Comment