I had recently moved this copier to a different location. It was working fine where it was, but after plugging everything back in and booting it up at this new location I received a few oddities. First, the document feeder came saying it had a misfeed, when it didn't. However, it stopped recognizing the document feeder for a time. After I reseated some some connections it started working. I ran five copies though, and I received an error code. The error code is C-0F36. It also has this maintenance light or something like that on, and when I click it a P21 code shows up. I do have a book, but not on me and I was hoping to rectify this probably as soon as possible. So if anyone could help me as to what could be causing these errors it'd be most appreciated. Thank you.
-
-
Re: Kyocera Mita KM-C2030
http://www.copytechnet.com/forums/ko...20-copier.html
Google? Yes, it crosses with bizhub 8020 or bizhub CF2002. It's a Konica Minolta rebadge. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: Kyocera Mita KM-C2030
C0F36: Abnormally low toner density detected Cyan ATDC Sensor
Check:
Toner Replenishing Motor C/Bk (M9)
IO Board (PWB-IO)
PIC Board (PWB-PIC)Last edited by laitang; 08-18-2014, 07:13 AM.Comment
Comment