Copystar CS 2030 C710 Error,(Toner sensor problem)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Doug James
    Senior Tech

    Site Contributor
    500+ Posts
    • Jan 2012
    • 935
    #1

    [Dead] Copystar CS 2030 C710 Error,(Toner sensor problem)

    Went to a working machine and cleaned the drum corona wire. The machine worked for awhile and then started throwing C710. I then changed the developer (Ran U130) the machine worked for a few days then the C710 error cam back. Question; Is the toner sensor glued in or is their a way to get it out. That is my next area to investigate. Not sure the Toner sensor is available though. Any feedback is greatly appreciated.
    Tags: None
    • quitech
      Technician

      50+ Posts
      • Jul 2013
      • 82
      #2
      Re: Copystar CS 2030 C710 Error,(Toner sensor problem)

      Originally posted by Doug James
      Went to a working machine and cleaned the drum corona wire. The machine worked for awhile and then started throwing C710. I then changed the developer (Ran U130) the machine worked for a few days then the C710 error cam back. Question; Is the toner sensor glued in or is their a way to get it out. That is my next area to investigate. Not sure the Toner sensor is available though. Any feedback is greatly appreciated.
      4 me i do use u131 to control this problem use your brain

        Comment

        • Doug James
          Senior Tech

          Site Contributor
          500+ Posts
          • Jan 2012
          • 935
          #3
          Re: Copystar CS 2030 C710 Error,(Toner sensor problem)

          Originally posted by quitech
          4 me i do use u131 to control this problem use your brain
          I actually did set U131 at 125 from 154. Thought I tried higher numbers but will do tomorrow... Thanks for your feedback

            Comment

            Previous template Next
            Working...