Hello, I have a problem with a DF-650 which does not classify many copies as indicated by the attachment. Does someone has a solution for me?
thank you
thank you
-
-
Re: DF-650 misclassification of copies
I had the same problem. After replacing many spares I eventually ended up swopping the DF...
I suspect it to be a PCB or firmware problem. Please let me know if you get this problem sorted.
Thank youThe product may be brilliant and the salesperson proficient, but if the technician isn’t efficient, then the story will end there. -
Re: DF-650 misclassification of copies
You'll need to find out why the flappers are not pulling the paper back into the stapling tray. They could be worn, or not flipping once per page. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment