We have had our taskalfa for a number of years and it has always printed fine. We recently upgraded some machines to windows 7 64 bit and when printing from those, the prints are shifted and cut-off at the right edge and bottom. We have tried for months to have our copier service company find a fix for this but they were not much help. Finally I installed an old HP driver for a LJ5000 we have in the office and tried printing to that and everything on that printer worked as it should. I then switched the driver that the Kyocera was using to the HP driver (so printing to the kyocera but using an hp driver) and it worked. This proved that the windows 7 64 bit driver from kyocera is at fault. Tried downloading all the newest drivers but they all did the same thing. Our Kyocera rep told me to just use an HP driver as the Kyocera ones are just modified HP drivers.
Anyone else having this issue or know what HP driver would be best to use with it? Seems like a work around not a fix.
Anyone else having this issue or know what HP driver would be best to use with it? Seems like a work around not a fix.
Comment