Unhealthy noise KM-5035

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AlexRust
    Technician

    Site Contributor
    • Apr 2014
    • 41

    #16
    Re: Unhealthy noise KM-5035

    Originally posted by repeat
    run simulation mode 30 to isolate the noise to the paper feed or main drive. when you narrow it down, please post
    Thanks repeat
    With joint efforts of the fellow techs on this forum the source of the noise was 8 step clutch on bypass unit. It was not rusted just dry plastic to plastic squeak.
    I am happy to report that noise has been fixed.

    Moderators:
    Is it possible to add feature to the forum so we can mark threads as "SOLVED". It will be very cool.

    Comment

    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23008

      #17
      Re: Unhealthy noise KM-5035

      Originally posted by AlexRust

      Moderators:
      Is it possible to add feature to the forum so we can mark threads as "SOLVED". It will be very cool.
      Or alternatively, responders could read all the associated threads to see that it was solved all by themselves. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

      Comment

      Working...