jamming with a pick up roller mark fsc 2126 mfp

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tatro35
    • Jul 2025
    #1

    [Jamming] jamming with a pick up roller mark fsc 2126 mfp

    The copier jams with a pick up roller mark .. paper does not go passed the feed and sep roller .. did replace the rollers
    Tags: fs c 2126, fs-c2126mfp, fsc 2126 mfp
    • tmaged
      Owner/Service Manager

      Site Contributor
      1,000+ Posts
      • Oct 2008
      • 1887
      #2
      Re: jamming with a pick up roller mark fsc 2126 mfp

      Make sure the pressure spring for the feed unit is still in there. Not the sep roller, but the primary feed unit. I've found a couple of them missing them. Could be customer or technician induced. Ours were jamming or taking a long time to feed pages without jamming.
      Hope that helps !
      -Tony
      www.dtios.com
      Become a fan on Facebook

        Comment

        • Kyo fan
          Trusted Tech

          250+ Posts
          • Dec 2013
          • 368
          #3
          Re: jamming with a pick up roller mark fsc 2126 mfp

          I have seen this multiple times. When fitting retard (separation) roller with it's frame, close the paper cassette completely, or it won't fit properly. It has to look like bottom pic here: retard_roller.jpg

            Comment

            Previous template Next
            Working...