..
-
Last edited by walterman; 01-23-2015, 10:17 PM. -
Re: Thoughts on Kyocera 5501I shading issues
Do you have any thoughts to start this out? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: Thoughts on Kyocera 5501I shading issues
Black cat, my guess, from all the details included is fuser with UFR accumulating toner buildup.
Pretty good, ay?Comment
-
Re: Thoughts on Kyocera 5501I shading issues
If your talking about a gray background, had it several times usually the DV was the problem.Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Thoughts on Kyocera 5501I shading issues
My apologizes, I thought I deleted this thread, it was supposed to be tied into my other thread about the shading issues I posted, but apparently was not totally deleted.Comment
Comment