[Misc] Kyocera 2550ci calibration

[pinzapazza]

Hello,

I installed the Kyocera 2550ci hire at a customer . It is a good product but the customer complains continuous calibration cycle . I set the cycle of long but it is always annoying . You can eliminate the automatic calibration and it only keyboard ?

[tmaged]

Re: Kyocera 2550ci calibration

I would check the error log. Also print pages in U089 making sure all colors density is correct. After that, I'd look at power & environment.

[pinzapazza]

Re: Kyocera 2550ci calibration

The prints are good . The problem is that the multifunction calibrates every 100 or 150 copies in full color. The customer complains about the excessive time to print .
I asked if it is possible to eliminate the automatic calibration . It would be performed upon request from the keyboard in case of faded copies or before a great job of color prints .
Hello and thank you for your attention .

[tmaged]

Re: Kyocera 2550ci calibration

I don't think there is any way to lengthen it. My thought is that there is something wrong that is causing it to calibrate like that. It's not common on that model to have that issue.

[Silver fox]

Re: Kyocera 2550ci calibration

In user maintainence there is option of cycle modes....long (quality isn't a issue on long hauls,cycles are further between)...standard(standard quality)....short(maintains quality through long hauls by calibrating every short number of pages).