No Error Code, But?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • blackdog
    Trusted Tech

    100+ Posts
    • Jun 2012
    • 211
    #1

    No Error Code, But?

    Hey I was working on a TA520i and noticed display was giving a
    "Tray A and Staple error", no error code.
    I checked for the obvious. Box is operating fine.
    Is there a setting that could have been messed with?
    Thanks
    Tags: None
    • blackdog
      Trusted Tech

      100+ Posts
      • Jun 2012
      • 211
      #2
      Re: No Error Code, But?

      Originally posted by blackdog
      Hey I was working on a TA520i and noticed display was giving a
      "Tray A and Staple error", no error code.
      I checked for the obvious. Box is operating fine.
      Is there a setting that could have been messed with?
      Thanks
      To be more precise, "tray a and stapler inoperative due to failure".

        Comment

        • Tonerkiller
          Senior Tech

          500+ Posts
          • Oct 2012
          • 665
          #3
          Re: No Error Code, But?

          Do a 906

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22973
              #4
              Re: No Error Code, But?

              The Tray A Inoperative part is usually caused by the wastebasket parked under the elevator tray. The stapler inoperative could be as simple as a staple jam. Both require the U906 reset, to resume.

              if you were to print of the U000 Event Log you can read the error codes. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • blackdog
                  Trusted Tech

                  100+ Posts
                  • Jun 2012
                  • 211
                  #5
                  Re: No Error Code, But?

                  Originally posted by blackcat4866
                  The Tray A Inoperative part is usually caused by the wastebasket parked under the elevator tray. The stapler inoperative could be as simple as a staple jam. Both require the U906 reset, to resume.

                  if you were to print of the U000 Event Log you can read the error codes. =^..^=
                  Awesome you guys.
                  Thanks for getting me out of a jam again.

                    Comment

                    • blackdog
                      Trusted Tech

                      100+ Posts
                      • Jun 2012
                      • 211
                      #6
                      Re: No Error Code, But?

                      Originally posted by Tonerkiller
                      Do a 906
                      I think I'll do a 906 and then a jig. Thanks

                        Comment

                        Previous template Next
                        Working...