Muratec MFX 1200 Poor cq when scanning from platen or ADF

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Doug James
    Senior Tech

    Site Contributor
    500+ Posts
    • Jan 2012
    • 935
    #1

    [CQ] Muratec MFX 1200 Poor cq when scanning from platen or ADF

    I cleaned the optics, changed the drum and toner. Prints fine when printing internal print jobs. Scan lamp seems to work OK. Reconnected connected strip wire harness from scanner. Any suggestions would be very helpful. Attached is an example...
    Attached Files
    Tags: None
    • dc313zd
      Technician
      • Feb 2016
      • 26
      #2
      Re: Muratec MFX 1200 Poor cq when scanning from platen or ADF

      Time for a new scanner/CCD a'ssy. Not uncommon on that old dog, they were rated for 1000 hours. Part number: D88A005040. Cost is $100.27 from Muratec

        Comment

        Previous template Next
        Working...