Welcome to the new Muratec Forum

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Aneurysm
    Administrator

    1,000+ Posts
    • Jan 2005
    • 1029
    #1

    Welcome to the new Muratec Forum

    The title says it all, Welcome to the new Muratec Forum!

    We will do our best to find and move all the existing posts regarding Mutatec equipment into this forum in the near future.
    "Remain calm. All is well." -Chip Diller, Nov 1963
    Tags: muratec, muratec copier forum, muratec fax forum, muratec forum, muratec tech forum
    • knightfall
      Senior Tech

      500+ Posts
      • Jul 2006
      • 633
      #2
      Re: Welcome to the new Muratec Forum

      wow
      Last edited by knightfall; 03-28-2013, 12:35 AM.
      Get your facts first, and then you can distort them as much as you please.

        Comment

        • fixthecopier
          ALIEN OVERLORD

          2,500+ Posts
          • Apr 2008
          • 4714
          #3
          Re: Welcome to the new Muratec Forum

          I have something to say about Muratec. They have really good tech support.
          The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22927
              #4
              Re: Welcome to the new Muratec Forum

              I believe that I've worked on two Muratec faxes. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • JR2ALTA
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Feb 2010
                  • 2028
                  #5
                  Re: Welcome to the new Muratec Forum

                  Originally posted by fixthecopier
                  I have something to say about Muratec. They have really good tech support.
                  True that. They are knowledgeable but even if they weren't I'd be satisfied by how kind they are. Talk to east coast a-holes for Kyocera or 2 hrs on hold with Konica makes you appreciate it.

                    Comment

                    • JR2ALTA
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Feb 2010
                      • 2028
                      #6
                      Re: Welcome to the new Muratec Forum

                      ..but I don't think they make their own products anymore. at least not full size mfps.

                        Comment

                        Previous template Next
                        Working...