P2040 Slow printing via Bypass

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nobody-here
    Trusted Tech

    Site Contributor
    100+ Posts
    • Mar 2008
    • 237
    #1

    [Misc] P2040 Slow printing via Bypass

    Hi everybody,

    We are new to Kyocera / Olivetti printers & MFP.

    We are noticing that printer, P2040, is slow when printing from BYPASS. We tried different drivers but no luck
    What else can we check.

    Silent print is disabled.

    Thank you for your help.
    29 rouge unpair manque.... cous cous....
    Tags: bypass, check, p2040, printing, slow
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22966
      #2
      Re: P2040 Slow printing via Bypass

      Only the bypass, or any time it awakens?

      Silent Mode increases warmup time. So does a Thick media setting (maybe the bypass is set to Thick1?). =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...