NEC IT 2520 Toner Hopper Replacement

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JasonW
    Technician

    50+ Posts
    • Apr 2009
    • 52
    #1

    NEC IT 2520 Toner Hopper Replacement

    I've been assigned the horrible task of replacing the toner hopper unit for a NEC IT 2520. The service manual doesn't give any procedure, so _please_ point me in the right direction...

    Do I need to start disassembling from the fuser / drum area, or the front of the machine where the paper exits, or the back?

    It looks like I have to take the entire machine apart, but I just want to be sure... I may just need to disassemble the fuser / drum area but I have no idea.


    THANK YOU _SOOOO_ MUCH!!
    Tags: 2520, disassemble, exits, hopper, nec, reassemble, removal, replacement, toner
    • JasonW
      Technician

      50+ Posts
      • Apr 2009
      • 52
      #2
      nevermind, i just started gutting everything. I got it in


      now to reassemble...

        Comment

        • KyoceraChris
          Trusted Tech

          100+ Posts
          • Jun 2009
          • 112
          #3
          the drum and dv come out in one unit, 4 screws on each side makes for removal of the drum.. its fairly simple , tell me how easy it is for you to enter the service mode
          you gunna eat yo corn bread?!?

            Comment

            Previous template Next
            Working...