109 results in 0.0311 seconds.
-
C454e paper exiting onto the conveyance
I have a C454e that is having an issue where paper occasionally exits on top of the conveyance/transport section. The machine is recognizing that a FS-534... -
Copystar 306ci machine gun noise while paper exits
Hi all,
I have a Copystar 306ci that makes a machine gun type noise when the sheet starts to exit. This is 81/2 x 11 and it starts when maybe... -
FS-4200DN, jams after exiting a few inches.
FS-4200DN with 170k on the clock. Take up, feed and separation rollers are new. Prints are jamming 8 out of 10. Paper exits a few inches out of the fuser... -
iR600 Static on Paper
Machine works fine, but the paper has so much static charge as it exits it sticks together!
Any idea what is causing this?
... -
iR330 DADF A1 Right Side Exit Jam
Ive seen this before but just don't remember what it was been along time since
I've seen this machine.
The DF A1 on the iR330 is jamming half... -
Savin C2525
Have a C2525, paper jams at the Fusing Unit. Was told I needed a new FU. Why not the Fusing tractor? Help please. -
Aficio 700 adf problem first document exits not second
On Aficio 700 if I run one document a t a time on adf it exits okay into right tray. If I put 2 documents the second will jam at entrance to document... -
Toshiba estudio 352
can someone tell me where the 2nd sensor on the bridge is located? i can find the one in the middle of the bridge just prior to paper going into finisher,... -
KM-5050 Squishing Text
Machine has low copy count, runs great. Only problem appears to be that the trail edge has a sort of blur to it. Seems to "squish" letters... -
SAVIN C2525
WORKING ON A SAVIN C2525. THEY JUST MOVED THE COPIER. THE PAPER STOPS (CAUSEING A JAM CODE) JUST BEFOR IT EXITS THE MACHINE AND ENTERS THE FINISHER.... -
MPC2500 Phantom Jams From Bypass
Just after some help or ideas. Ive got an MPC2500 with phantom jams from the bypass, the machine says its jammed in the side door but there is never any... -
lanier id075 (richo aficio 1075) jamming in duplex
Working on this machine again. Just rebuilt the fuser. They called back and said it was jamming. When i arrived discoverd it is jamming only on 2 sided... -
Kyocera 5035 SRDF duplex issue
Doc feeder is fine doing 1 to 1 and 1 to 2. Selecting 2 to 2, the original flips and scans the second side first. The trail edge has a what looks like... -
Toshiba e-studio 901 with error code SC 750
I have a machine that is down with an error code 750. Does anyone have any suggestions? -
