iR330 DADF A1 Right Side Exit Jam

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • imagewalker
    Technician
    • Jun 2010
    • 94
    #1

    iR330 DADF A1 Right Side Exit Jam

    Ive seen this before but just don't remember what it was been along time since
    I've seen this machine.
    The DF A1 on the iR330 is jamming half way out the exit on the right hand side.

    Any one remember this problem?

    Oh also with the finisher attached can i get it to exit to the top rather than the right side on the A1 DADF.
    I know when in fax mode it only exits to the right but this machine has no fax...

    Thanks
    IW
    Tags: dadf, exit, exits, half, ir330, jam, jamming, side, time
    • mrfixit51
      Lead Service Technician

      1,000+ Posts
      • Oct 2008
      • 1975
      #2
      Blow out the sensors in the DADF and run Sensor Init to rule out flakey sensors...
      "Once a King, always a King, but once a Knight is enough!"

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Originally posted by imagewalker
          Ive seen this before but just don't remember what it was been along time since
          I've seen this machine.
          The DF A1 on the iR330 is jamming half way out the exit on the right hand side.

          Any one remember this problem?

          Oh also with the finisher attached can i get it to exit to the top rather than the right side on the A1 DADF.
          I know when in fax mode it only exits to the right but this machine has no fax...

          Thanks
          IW
          AFTER Cleaning sensors & doing a sensor level adjust/ do a Width adj below





          imageRUNNER 330 / 400
          DADF-A1





          after performing a Sensor Level adjustment , an Original Width Adjustment needs to be performed. Follow the procedure below, to perform the Original Width Adjustment.
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22930
              #4
              How about some jam codes? =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...