Oki C 5500 Fuser reset fuse?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bernyb
    Technician

    Site Contributor
    • Feb 2008
    • 42

    #1

    [Electrical] Oki C 5500 Fuser reset fuse?

    I think the error code is 980 however I have researched it and know that it is a fuser replace code. Customer has asked me to look at this and now it has taken over. I know I can order the fuser and reset this. The fuser looks in fine shape. I have completely disassembled it and see no reason to replace it so my question is where is the reset fuse for this thing. The main thermistor is unusual from my perspective and it has 4 wires going to so I am not sure about that. There is a double set of wires that go into the teflon roller which does not carry the heater rods and it reads high resistance when cold like a thermistor would. The thermal fuse is good. I didn't find any pico fuses anywhere in the two connectors so where is the reset fuse? Don't ask me why I am crazed by this but I am. I just want to know. Anybody?
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Hey Berny, how you doing?

    From the service manual:

    Error by media
    clinging to the fuser
    The manual suggests to replace the fuser.

    HtH
    Paul

    Comment

    Working...