Printing on Film KIP 5000

[Mr Spock]

You are telling the machine that you are using film and not bond. If not then it will slip while feeding and there is nothing to fix.

[KMnyafayce]

Hey everyone,

I got a customer trying to print on film (clear plastic) on her Kip 5000. it's cutting off about 2 inches of the image. If you try to print the same file on bond, it prints out fine. on both media's the cut sheet is the same size. I called Konica Minolta tech support only to have them tell me that the film, which the customer purchased from them directly, is at fault. Does anyone know of a supplier of film for the 5000 that works good, and if so what is the item number?

Thanks.