Canon tech but want to help friend with panasonic FP7728. Has a message on display to tel 4 p/m. Can this be reset easily. Is there really maintenance required immediately. Would appreciate some info. Thanks in advance
-
-
This machine takes me back.
To reset pm counter you need to go into servive mode by pressing and holding user preset key, followed by pressing and multi copy 3 key, then tap original A3 key.
F1 will then appear on display, Select F7 then press copy key followed by 99 then copy key, select 1 then copy key.
This resets all the counters. It possible will be a pm for the web or even the dev,drum, etc..
To exit service mode Hold user preset key then tap Clear/stop key.
Its been a good few years since I operated one of these so I hope my instructions are Okay. -
Thanks re 7728
That did the trick, not sure which item needed pm but we are running. Thanks again , if you ever need help with Canon I'll be glad to help.Comment
Comment