2330 Duplex Jams

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Magebomba
    Technician
    • Dec 2008
    • 92
    #1

    2330 Duplex Jams

    Docfeeder duplex jams at registration, before second side is scanned. J-72
    Only jams at 2-sided only.

    Have changed:
    both solenoids on adf
    registration clutch
    reverse clutch
    adf pcb
    main(big) feed rollers & shaft
    both sensor arms, also moved the one sensor towards the guide per Panasonic Bulleten
    feed/sep/pickup rollers

    I am going crazy! Any and all ideas are welcome!
    Thanks in advance guys!
    Tags: 2330, actuator, adf, adjustment, black, broken, bulletin, docfeeder, duplex, eject, feed rollers, jams, mark, mod, off, plastic, replace, sensor, version, white, work
    • Greg2003
      #2
      I would also check and/or change the wiring harness.

      Greg

        Comment

        • mojorolla
          The Wolf

          2,500+ Posts
          • Jan 2010
          • 2583
          #3
          sounds like the eject sensor is broken. its a real pain in the ass to get to. the adf has to come completley off its base...its not fun.
          Failing to plan is planning to fail!!!

            Comment

            • The-Peanut
              Trusted Tech
              Site Contributor
              100+ Posts
              • Aug 2006
              • 192
              #4
              replace that black plastic actuator, the mod version has a white mark on it, somtimes the bulletin adjustment does not work

                Comment

                Previous template Next
                Working...