Panasonic DP4510, e05-11

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • crazy_freddo
    Guest replied
    There was a TI out for this problem in Nov. 2005. Basically what the problem is that the rear fram of the large paper cassette is pinching the wires of a harness at the rear of the machine. If you want a copy of the TI PM me

    Leave a comment:


  • just a tech
    replied
    i agree with jeffrey..printer engine communication abnormal..check the connections between the spc and the sc boards..looking at copier from rear--the sc board is in upper left corner behind little panel cover and the spc board will be in lower left area behind the waste toner bottle.. ya may have a spc board that's really dirty due to toner dust .. i'd clean the boards and reseat the connectors for starters.. hope this helps..

    Leave a comment:


  • jeffreyozz
    replied
    printer engine communication abnormal- check the connections on the pcb.

    Leave a comment:


  • ebsystem
    Guest started a topic Panasonic DP4510, e05-11

    Panasonic DP4510, e05-11

    Getting error e05-11 on Panasonic DP4510. Need diagnostic help no Manual on this. Any help is appreciated.
Working...