How to enter service mode Dp-6030

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • KyoceraChris
    Trusted Tech

    100+ Posts
    • Jun 2009
    • 112

    #1

    How to enter service mode Dp-6030

    hello fellow techs! As you can see from my s/n im not a panasonic tech but i was asked as a favor to fix one.. It had a jam in the fuser and also displaying an e04-02 code . How do i get into the service mode to reset this beast?

    Thanks alot!!
    you gunna eat yo corn bread?!?
  • User Name
    Awesome Sauce

    250+ Posts
    • Nov 2009
    • 405

    #2
    To enter the service mode press and hold Function, Original Size (Ledger/A3), and 3. F1 will appear on the display.

    Go to F9 (Press 9 on the keypad and then start), use the arrows to the right of the touch screen to scroll down and press 06 Ram Initialize on the touch screen, scroll down again then press 04 LBP Fuser Reset. After a few seconds the machine will tell you to reset the power, do so and your done.

    Good luck.
    Just because you're not paranoid doesn't mean they're not out to get you.
    O.o


    WARNING: My profile page can cause blindness in small children and old copier techs. View at your own risk.

    Comment

    • KyoceraChris
      Trusted Tech

      100+ Posts
      • Jun 2009
      • 112

      #3
      awesome, thanks!
      you gunna eat yo corn bread?!?

      Comment

      Working...