Panasonic DP3030 E03-40!!!!!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • O sentinela
    Technician
    • Nov 2010
    • 20
    #1

    [Error Code] Panasonic DP3030 E03-40!!!!!

    hello guys. I have a Panasonic DP3030 put you a ruler and a drum cleaning and when I ran the f8-14 gave me a code E03-40. And the copies come out with background ..... I need help
    Tags: None
    • O sentinela
      Technician
      • Nov 2010
      • 20
      #2
      Re: Panasonic DP3030 E03-40!!!!!

      hello guys. I have a Panasonic DP3030 put you a drum and a cleaning blade and when I run the f8-14 gave me a code E03-40. And the copies come out with background ..... I need help

        Comment

        • mojorolla
          The Wolf

          2,500+ Posts
          • Jan 2010
          • 2583
          #3
          Re: Panasonic DP3030 E03-40!!!!!

          Check the 2 sensors under the silver baffle on the right door, near the transfer roller. They are moved up and down by a solenoid. If the silver baffle is not installed right, it can bind the rear and keep the sensors from moving smoothly.

          3030.jpg

          Failing to plan is planning to fail!!!

            Comment

            • O sentinela
              Technician
              • Nov 2010
              • 20
              #4
              Re: Panasonic DP3030 E03-40!!!!!

              Originally posted by mojorolla
              Check the 2 sensors under the silver baffle on the right door, near the transfer roller. They are moved up and down by a solenoid. If the silver baffle is not installed right, it can bind the rear and keep the sensors from moving smoothly.

              [ATTACH=CONFIG]15225[/ATTACH]

              Thanks man i really aprecciate your work and did work....i clean the sensor and the problem it's solve thanks again....

                Comment

                Previous template Next
                Working...