If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If i'm not wrong there's a Service bulletin somewhere for the recurrent fuser related troubles of this box. would be great if someone can share it.
imaginGuru
there r 4 that i can see but nothing major
there is 1 for the fuser lamp harness
1 for the cleaning web to help rotation
strenthen of the fuser actuator (can be broken when removing jams)
change of the heat roller
I was looking for something related to the Fuser related codes. But I'll be glad to get these 4 instead, I deal a lot with these machines and any new info is always welcomed.
Should you need something in exchange, just let me know (and give me your email).
I was looking for something related to the Fuser related codes. But I'll be glad to get these 4 instead, I deal a lot with these machines and any new info is always welcomed.
Should you need something in exchange, just let me know (and give me your email).
Comment