J18 DP 8060

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ESTANISLAOWENENTON
    • Jun 2025

    #1

    J18 DP 8060

    HELLO


    IN A MACHINE DP 8060, ERROR APPEARS J 18


    CASETT LEAF LEAVES 3 O 4 WELL
    BUT J18



    HE TRIED IN F4 SENSORS AND WORK WELL


    IF I LEAVE THE PAPER, SHUT OFF and turn on, SHOW JAM


    SEEMS TO BE WELL SENSOR


    THANKS FOR YOUR HELP


    YOU HAVE THE MANUAL JUSTMANUAL
  • onetek
    Trusted Tech

    250+ Posts
    • Apr 2009
    • 318

    #2
    Re: J18 DP 8060

    I have had severall j18 jams comming from the first paper feed clutch ( the one closest to pickup rollers). You can isolate your problem by switching paper feed units from one drawer to the next.)

    Comment

    • ESTANISLAOWENENTON

      #3
      Re: J18 DP 8060

      THANKS FOR ANSWER


      NOW THAT I DID,
      still jams


      THANKS

      Comment

      • JustManuals
        Field Supervisor

        5,000+ Posts
        • Jan 2006
        • 9838

        #4
        Re: J18 DP 8060

        This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

        Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


        Paul@justmanuals.com

        Comment

        • copiman
          Technician

          500+ Posts
          • Sep 2011
          • 861

          #5
          Re: J18 DP 8060

          Does it jam out of all 4 trays?

          Comment

          • ESTANISLAOWENENTON

            #6
            Re: J18 DP 8060

            Originally posted by copiman
            Does it jam out of all 4 trays?
            thanks for answering


            j 08 now


            not only clogs the 3 and 4


            swap the 1 and 2 for the 3 and 4
            jams


            paper goes well the cassett be 3 or 4, but is at the top right
            ok the sensor half sen
            timing


            ok the timing sensor

            tahnks

            Comment

            • onetek
              Trusted Tech

              250+ Posts
              • Apr 2009
              • 318

              #7
              Re: J18 DP 8060

              Is it giving j18 jams or j08 jams? J08 jams could point to intermediate transport rollers or clutch.

              Comment

              Working...