J18 DP 8060

[Guest]

HELLO


IN A MACHINE DP 8060, ERROR APPEARS J 18


CASETT LEAF LEAVES 3 O 4 WELL
BUT J18



HE TRIED IN F4 SENSORS AND WORK WELL


IF I LEAVE THE PAPER, SHUT OFF and turn on, SHOW JAM


SEEMS TO BE WELL SENSOR


THANKS FOR YOUR HELP


YOU HAVE THE MANUAL JUSTMANUAL

[onetek]

Re: J18 DP 8060

I have had severall j18 jams comming from the first paper feed clutch ( the one closest to pickup rollers). You can isolate your problem by switching paper feed units from one drawer to the next.)

[ESTANISLAOWENENTON]

Re: J18 DP 8060

THANKS FOR ANSWER


NOW THAT I DID,
still jams


THANKS

[JustManuals]

Re: J18 DP 8060

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[copiman]

Re: J18 DP 8060

Does it jam out of all 4 trays?

[ESTANISLAOWENENTON]

Re: J18 DP 8060

Does it jam out of all 4 trays?

thanks for answering


j 08 now


not only clogs the 3 and 4


swap the 1 and 2 for the 3 and 4
jams


paper goes well the cassett be 3 or 4, but is at the top right
ok the sensor half sen
timing


ok the timing sensor

tahnks

[onetek]

Re: J18 DP 8060

Is it giving j18 jams or j08 jams? J08 jams could point to intermediate transport rollers or clutch.