Sorry if this is repeat question. I searched the archives and didn't see any reference to this error. Machine runs 4 or 5 copies and then shuts down with this error. Open and close cover and runs 4 or 5 copies again. This customer bought a fuser replacement on-line and replaced himself with no improvement. I cannot verify the purchased fuser was any good. I would appreciate a definition for this error though. Thanks.
-
-
Re: DP-C405 Error E04-12
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
-
Re: DP-C405 Error E04-12
Fuser pressure roller fan error, rotation of the fan not detected after a predermined time or the fan keeps rotating after a predetermined time has elapsed. Fan is located on the right side and acts as an exhaust fan for the heat. I've never had to replace this fan so I don't know how involved disassembly is. Good luck.Comment
-
Re: DP-C405 Error E04-12
This is a known issue on this model. Replace the fuser fan and the toner cooling fan (not fun, entire SC pwb and mounting bracket removed) and the code will disappear.
Failing to plan is planning to fail!!!Comment
Comment