Ricoh Aficio MP301 with SC672

[FrohnB]

Re: Ricoh Aficio MP301 with SC672

I agree with a few people on here, that it could be the Fax board. I have only had one that required a new controller. A couple of times it was just the little MBU board that resides on the fax board, it "un-seats" a little bit (only held down by the connector and two plastic "posts"), and can cause that code. Something to check anyway.

[muhammadreza]

Re: Ricoh Aficio MP301 with SC672

Remove Fax bored

[MatthewS]

Re: Ricoh Aficio MP301 with SC672

Try setting in SP Mode System - 5191 to 0. It's worked for me couple of times regarding SC672 issues.

[TonerMunkeh]

Re: Ricoh Aficio MP301 with SC672

These things don't have that SP mode

[Hadster]

Re: Ricoh Aficio MP301 with SC672

I had this the other day. Removed fax and code went away! Went back replace Fax board and all is well.