I have a two week old machine which has less than 1000 prints on it which is printing photos really dark. Every print comes out dark like a miserable winters day when the photo on the screen is a bright sunny day.
Before you think it's screen calibration or RGB to CMYK isn't the same and it's not a WYSIWYG printer etc etc the same photos print perfectly on their existing MPC2551.
I've calibrated it but haven't touched anything else as everything is as per a standard machine.
As a workaround I've created a profile in the print driver with the brightness increased by 50%.
Anyone seen this, using PCL6 driver
Thanks
Sent from my iPhone using Tapatalk
Before you think it's screen calibration or RGB to CMYK isn't the same and it's not a WYSIWYG printer etc etc the same photos print perfectly on their existing MPC2551.
I've calibrated it but haven't touched anything else as everything is as per a standard machine.
As a workaround I've created a profile in the print driver with the brightness increased by 50%.
Anyone seen this, using PCL6 driver
Thanks
Sent from my iPhone using Tapatalk
Comment